Three Ways To Renovate And Remodel Concrete And Masonry With Little Impact
If you need to do renovations or remodeling, this can often include making changes to concrete and masonry. This can be done using various machines, such as a wet saw to make small cuts. For clean cuts, you may want to have something like water jet cutting done, which can also be good if there is a lot of cutting work to be done. Here are some of the ways you may want to consider to make small changes to concrete and masonry work:
1. Using A Small Wet Saw To Make Minor Cuts
Often the cuts that you need to make can be small straight cuts. This is something that can be done with a wet saw, which is a circular blade that is coated with a lubricant to cut through stone, concrete and masonry. These can be large machines, or they can be smaller handheld tools, which can be good for things like cutting materials out around a window opening to make changes. This type of equipment is usually limited to straight lines and requires a skilled operator to make the cuts.
2. Using A Mortar Saw To Remove And Prepare Brick And Stone
If you are making changes to stone or masonry, a mortar saw may be a good solution. This can be good if you are renovating old walls and removing some brickwork. These saws can be used to remove the mortar, which will make it easier to remove bricks. In areas where bricks are not removed, the saw can be set to a certain depth to only remove the face of the mortar. When new brick is installed, the mortar can be redone, so that the repairs and changes in the brick are not noticeable.
3. Using A Water Jet Cutting Tool For Complicated Cutting
Water jet techniques can be a better solution for areas where you need to make complicated cuts that may include angles and radiuses. This is a technique that uses high pressure jets of water and abrasive mixtures to cut hard materials. Water jet cutting can also be a good solution if there is an extensive amount of cutting that needs to be done precisely.
These are some of the ways you can make minor changes to concrete and masonry. If you need to have major cutting done, contact a water jet cutting service ( like Cincinnati Ventilating Company Inc) to cut all the masonry and concrete for your project.